Fitment
Polaris Slingshot 2015–2026. Check the product-specific mounting and compatibility requirements below.
Ride-height and damping control for every 2015–2026 Slingshot.
The Twist Dynamics double-adjustable coil-over set combines serialized, individually dyno-tested dampers with 18-click compression and rebound adjustment for a tunable balance of comfort, control, and ride height.
Vehicle fitment: Polaris Slingshot 2015–2026
Damping adjustment: 18 simultaneous compression/rebound settings
Ride-height range: Up to 2 inches of adjustment
Typical installation: 120–180 minutes
Key features
- Three-stage sealing system
- Serialized and individually dyno tested
- Precision-machined aluminum piston with deflective-disc valving
- Low-stiction PTFE piston band
- High-strength billet-aluminum shock body
- 5/8-inch hard-chrome-plated piston rod
Installation details
- Estimated installation time: Approximately 2 hours.
- Difficulty: Moderate — some experience.
- People needed: 1 person.
- Tools and equipment: Jack or lift, basic wrenches and sockets.
Time estimates are based on experienced installers. Actual time may vary with experience, tools, and vehicle modifications.
Damping and ride-height adjustment
Eighteen adjustment positions change compression and rebound together. The coil-over spring perch allows up to two inches of ride-height adjustment. Make small, equal changes and verify clearance and alignment after any height change.
Spring construction
The included U.S.-made springs use high-tensile chrome-silicon steel and are heat treated and shot peened for durability and travel.
Installation
Typical installation takes approximately 120–180 minutes. Suspension work requires safely supporting the vehicle and correctly torquing all fasteners. View the installation guide.
Production and finishes
Standard Gray units are commonly stocked, subject to availability. Custom powdercoat has an estimated production lead time of 3–5 weeks. Black and Pearl Red are normally in stock, where offered. If lead time is a concern, contact Slingshot Only before ordering to confirm availability and timing.
Detailed specifications for this item are included in the full product description.
Fitment requirements vary for this item. Review the description and confirm your year and model before ordering.
Free shipping is available on eligible orders over $85. Final eligibility, rate, carrier, and delivery estimate are confirmed at checkout. Oversize, freight, and made-to-order items may require additional handling time.
View shipping policyFitment
Polaris Slingshot 2015–2026. Check the product-specific mounting and compatibility requirements below.
Ride-height and damping control for every 2015–2026 Slingshot.
The Twist Dynamics double-adjustable coil-over set combines serialized, individually dyno-tested dampers with 18-click compression and rebound adjustment for a tunable balance of comfort, control, and ride height.
Vehicle fitment: Polaris Slingshot 2015–2026
Damping adjustment: 18 simultaneous compression/rebound settings
Ride-height range: Up to 2 inches of adjustment
Typical installation: 120–180 minutes
Key features
- Three-stage sealing system
- Serialized and individually dyno tested
- Precision-machined aluminum piston with deflective-disc valving
- Low-stiction PTFE piston band
- High-strength billet-aluminum shock body
- 5/8-inch hard-chrome-plated piston rod
Installation details
- Estimated installation time: Approximately 2 hours.
- Difficulty: Moderate — some experience.
- People needed: 1 person.
- Tools and equipment: Jack or lift, basic wrenches and sockets.
Time estimates are based on experienced installers. Actual time may vary with experience, tools, and vehicle modifications.
Damping and ride-height adjustment
Eighteen adjustment positions change compression and rebound together. The coil-over spring perch allows up to two inches of ride-height adjustment. Make small, equal changes and verify clearance and alignment after any height change.
Spring construction
The included U.S.-made springs use high-tensile chrome-silicon steel and are heat treated and shot peened for durability and travel.
Installation
Typical installation takes approximately 120–180 minutes. Suspension work requires safely supporting the vehicle and correctly torquing all fasteners. View the installation guide.
Production and finishes
Standard Gray units are commonly stocked, subject to availability. Custom powdercoat has an estimated production lead time of 3–5 weeks. Black and Pearl Red are normally in stock, where offered. If lead time is a concern, contact Slingshot Only before ordering to confirm availability and timing.
Detailed specifications for this item are included in the full product description.
Fitment requirements vary for this item. Review the description and confirm your year and model before ordering.
Contact us for fitment help